|
|
|
|
|
|
|
|
|
|
|
Molded of high-temperature, thermoset plastic. Mounts on 4" outlet boxes with breakout for 3.25" box mounting. 4 top wire screws. Terminal screws backed out. Meets all UL 496 requirements. 250 volt, 660 watts.
|
Porcelain. Mounts on 4" outlet boxes with breakout for 3-1/4" box mounting. One piece with feed through. Terminal screws backed out for wiring without removing the interior. UL 496 Listed, NOM Certified, meets CSA requirements. 250 volt, 660 watts.
|
Insulation displacement terminals for standard wire. Lay-in wire channel, 1/4" turn twist top speeds installation. One piece terminals and contacts. Wire range 18 to 12. Sockets are made of heat-resistant phenolic. Hook mounting. 660 watts. 250 volt. Meets all UL 496 requirements.
|
|
|
|
|
|
|
|
|
|
|
|
|
Made of UV and heat resistant thermoset material (Urea). Nickel-plated brass screw shell. 250 volts/660 watts maximum. Includes corrosion resistant steel hardware. cULus Listed.
|
Jandorf Lamp Socket, 660 W Lamp, 600 V, Fluorescent Lamp, Medium Bi-Pin Base
|
White slimline lampholders. For replacement use in fluorescent lighting fixtures as well as enclosed outdoor signs. Molded of white thermoset plastic for appearance and durability. UL Listed. Temperature rating of -40 to 65 degrees C.
|
|
|
|
|
|
|
|
|
|
|
|
|
Jandorf Lamp Socket, 660 W Lamp, 600 V, Fluorescent Lamp, Medium Bi-Pin Base
|
Molded of heat and impact resistant urea. 660 watts, 250 volts. Fits catalog numbers 940, 941 and 485. Interiors UL component recognized.
|
Two piece hanger bar for 24" maximum joist spacing. Made of steel with a galvanized finish.
|
|
|
|
|
|
|
|
|
|
|
|
|
Meets all UL 1786 requirements. Soft action rocker switch. 3,000 hour lamp life. Shade can rotate 360 degrees. Molded of heat resistant plastic. 15 amp, 125 volt. UL Listed. Carded.
|
Meets all UL 1786 requirements. Soft action rocker switch. 3,000 hour lamp life. Shade can rotate 360 degrees. Molded of heat resistant plastic. 15 amp, 125 volt. UL Listed. Carded.
|
Molded of thermoset plastic. 75 watts, 125 volts.
|
|
|
|
|
|
|
|
|
|
|
|
|
Molded of thermoset plastic. 75 watts, 125 volts.
|
Molded of thermoset plastic. 75 watts, 125 volts.
|
Molded of heat and impact resistant urea. 250 watt, 250 volt. Interiors UL component recognized. Fits catalog number 925.
|
|
|
|
|
|
|
|
|
|
|
|
|
Screw terminals are backed out. Hickeys and nipples are threaded for mounting on standard fixture, 1 amp stems or brackets. 7/16" bracket height. 1-7/8" overall height. 660 watts, 250 volts. Meets all UL 496 requirements.
|
Molded of heat and impact-resistant urea. 250 watts, 250 volts. Aluminum, brass dipped finish. Fits catalog number 980. Interiors are UL component recognized.
|
Medium base 250 watt 250 volt. Screw terminals are backed out ready for wiring. Interiors have removable turn knobs. 1/2" bracket height. 2-1/4" overall height. Temperature rating: -40 to 65 degrees C. UL Listed, CSA and NOM certified.
|
|
|
|
|
|
|
|
|
|
|
|
|
Interior pull chain for medium base lampholders. Molded of heat and impact-resistant phenolic or urea. Interiors are UL component recognized. One circuit pull chain switch. 250W 250V.
|
Jandorf Lamp Socket, 660 W Lamp, 1000 V, Fluorescent Lamp, Single Pin Base
|
With 6", 18 awg wire leads. 660 watts, 250 volts.
|
|
|
|
|
|
|
|
|
|
|
|
|
For use in electrical equipment, harnesses, light strings. Wire leads are 5", 14 gauge, color-coded and stranded wire, stripped 1". Rubber sockets have an extended lip to seal against bulb. Metal shell interiors are aluminum, nickel-plated copper. 660 watt. UL listed.
|
Junction box cover plate. 4 inch.
|
Caps threaded 1/8"-27 I.P.S. Fit standard lamp stems. Set screw prevents rotation of socket. Aluminum brass dipped finish. 250 watts, 250 volts. Temperature rating: -40 degrees C to 65 degrees C. UL Listed, file E7430, UL 496 requirements. NOM Certified.
|
|
|
|
|
|
|
|
|
|
|
|
|
Jandorf Lamp Socket, 660 W Lamp, 1000 V, Fluorescent Lamp, Single Pin Base, Plunger Terminal
|
For use with stage lighting and similar applications. One piece with front wire screw terminals. 660 watt 250 volt. Meets all UL 496 requirements.
|
Porcelain, mounts on 4" outlet box with breakout for 3-1/4" box mounting. Interior is removable. Includes ball chain, 3' of cord, connector and end ball. UL Listed, meets CSA requirements, NOM certified. 250 volt, 660 watts.
|
|
|
|
|
|
|
|
|
|
|
|
|
Socket for candelabra base bulbs, with 1/8 IP hickey. Rated 75 watt-125 volt. Use only with #16 or #18 AWG stranded copper wire.
|
Meets all UL 496 requirements. Molded of high-temperature, thermoset plastic to prevent discoloration and reduce breakage. Mounts on 4" outlet boxes with breakout for 3-1/4" box mounting. Pull chain, includes ball chain, 3' of cord, connector and end bell. Terminal screws backed out, ready for wiring without removing interior. Push wire terminals are top wired with two push-in terminals and two screw terminals for continuous wiring. Two piece version with 15 amp 125 volt, 250 watts AC 2P3W outlet, plastic.
|
With 6", 18 awg wire leads. 660 watts, 250 volts.
|
|