Home > HARDWARE > LOCKSETS & KEYING SUPPLIES > STOREROOM LOCKSETS
Choose a sub category:
PANIC BARS PANIC BARS PANIC BARS
STOREROOM LOCKS - KNOB RIM LOCKSETS RIM LOCKSETS
RIM LOCKSETS STOREROOM LOCKS - LEVER MORTISE LOCKSETS
MORTISE LOCKSETS MORTISE LOCKSETS SURFACE LATCH LOCKS
SURFACE LATCH LOCKS SURFACE LATCH LOCKS REPLACEMENT KNOBS
REPLACEMENT KNOBS REPLACEMENT KNOBS TRIM ROSETTES & PLATES
TRIM ROSETTES & PLATES TRIM ROSETTES & PLATES
Sort By:
1 2
Prime Line U-9965 Rim Cylinder Lock Prime Line E 2294 Mortise Lock Assembly Prime Line E-2317 Adjustable Knob Passage Door Latch Set
Heavy-duty diecast housing with brass face and 5 pin tumbler lock. For Kwikset and Weiser locks. Includes 1 key cylinder with trim ring, 2 keys, 1 mounting plate, and 2 screws. Mortise caselock with brass plated faceplate. Case hardened steel housing. Spindle hole accommodates 1/4" to 5/16" square shaft. Includes 1 mortise caselock assembly, strike plate, and installation screws. Latchbolt operated by knob on either side; both knobs always free. Diecast latch. Glass knobs. Spindle hole accommodates  5/16" star drive, 1/4" to 5/16" square shaft. Use as decorative passage latch for 2-3/8" backset applications. Includes 1 passage door latch, 1 spindle, 2 knobs, 2 rosettes, and installation screws.
Prime Line E 2437 Reversible Door Lockset Prime-Line SE 70002 Lock Cylinder Prime Line E 2478 Lockset
Cast steel case lock and keeper. Surface mount design. Brass plated steel knobs and rosettes. Skeleton key system. Used on non mortise applications. Includes 1 lock, 1 keeper, 1 key rosette, 1 knob rosette, 2 knobs, and 2 keys. Original SEGAL brand rim cylinder design, 1-3/16", solid brass replacement lock cylinder, 5 pin tumbler, SEGAL keyway can be re-keyed, adjustable tail length, Cast steel case lock and keeper. Surface mount design. Brass plated steel knobs and rosettes. Skeleton key system. Used on non mortise applications. Includes 1 lock, 1 keeper, 1 key rosette, 1 knob rosette, 2 knobs, and 2 keys.
Toolbasix 6870372-3L Mortise Lock Prime Line E-2311 Victorian Keyed Mortise Lock Set KNOBSET STOREROOM GRADE 2 S/S
Steel knob with brass plating. For home and office use. Includes trim plate, strike, knob and two keys. Deadbolt locks from both sides. 2-3/8" backset. 3"L x 9/16"W x 3-7/8"H overall dimensions, 2-9/32"W x 7-1/16"L trim plate. Fluted glass knobs with brass plated steel trim plates. Case-hardened steel housing. Lock bolt is key activated both inside and outside. May be used for left or right hand installations. Includes 1 mortise caselock assembly, 2 knobs, 2 trim plates, strike plate, and installation screws. Outside Knob Always Locked, Inside Knob Always Free; Key Outside Retracts Latch. All Metal Components. Solid Steel Deadlocking Latch Assembly. Rust Resistant Solid Brass Keyway For More Security. Seamless One-Piece Knob For Extra Strength. DOOR PREP: 2-1/8" Crossbore, 1" Edge Bore, 1" X 2-1/4" Latch Face. DOOR THICKNESS: Fits 1-1/4" To 1-13/16" Doors. CYLINDER: 6-Pin, Removable SC1 Keyway, Solid Brass, One Piece; Re-Keys To Schlage. With 2 Nickel Plated, Solid Brass Keys. FACEPLATES: 1-1/8 X 2-1/4 STRIKES: 1-1/8" X 2-3/4" Square Corner T-Strike. BOLT: Steel 1/2" Throw. HANDING: Reversible For Right Or Left Hand Doors. ANSI/BHMA: Grade 2. U.L. Approved 3-Hour Fire Rating.
Schlage Orbit F80 Contractor Single Cylinder Ball Entry Knob Lockset STOREROOM KNOB EMP G2 2-3/4BS Schlage J Deadbolt/Handle Set Single Cylinder Outside Handleset
For professional needs such as small apartments, churches, restrooms and small offices; specifically designed where basic security needs or specific codes must be met, but usage is low to moderate. Outside knob is fixed, entrance by key only; inside knob always unlocked. 1 piece knob for better security and appearance. Solid brass trim and all metal parts. Wrought brass exposed trim. Pressure cast zinc tubular lock housing. Key removable outside knob for easy cylinder replacement. 3 piece assembly for easy installation. SecureKey technology enables you to re-key your locks in seconds. Heavy-duty cylindrical knobsets; designed for use in high traffic areas such as office building, schools, churches, restaurants, retail stores and warehouses; complies with ANSI A156.2, Series 4000, Grade 2 (400,000) cycles, UL listed for 3 hour fire door. Door range: 1-3/8" to 1-3/4". Backset: 2-3/4" standard. Commercial and Residential. Indoor and Outdoor. Fits standard 161 door prep, Schlage C keyway, keyed different; includes 2 nickel silver keys. Easy installation; fits all standard door preparations; deadbolt thrown or retracted by key from outside or by inside turn unit; can be rekeyed to match existing locks or other locks purchased.
Schlage J Deadbolt/Handle Set Single Cylinder Outside Handleset STOREROOM LEVER CTL ADJUST BS LEVER STOREROOM GRADE 2 S/S ZC
Easy installation; fits all standard door preparations; deadbolt thrown or retracted by key from outside or by inside turn unit; can be rekeyed to match existing locks or other locks purchased. Heavy-duty commercial storeroom lever; complies with ANSI A156.2, Series 4000, Grade 2 (400,000 cycles), UL listed for 3 hour fire door, ANSI A117.1 American Disabilities Act (ADA). Keying: 6 pin SCC keyway with 2 nickel keys per lock. Door range: 1-3/8" to 2". Backset: 2-3/4" standard. Strike: T strike (1-1/8" x 2-3/4") standard. Cylindrical, steel coated with zinc dichromate (corrosion resistance). Latchbolt operated by rotating inside lever or key in outside lever. Outside lever always fixed. Outside lever always locked, inside lever always free; key outside retracts latch. All metal components. Solid steel deadlocking latch assembly. Rust resistant solid brass keyway for more security. Seamless one-piece lever for extra strength. DOOR PREP: 2-1/8" Crossbore, 1" Edge Bore, 1" x 2-1/4" Latch Face. DOOR THICKNESS: Fits 1-1/4" to 1-13/16" doors. CYLINDER: 6-pin, removable SC1 keyway, solid brass, one piece; re-keys to Schlage.  With 2 nickel plated, solid brass keys. FACEPLATES: Adjustable for flat or beveled doors. STRIKES: 1-1/8" x 2-3/4" square corner T-strike. BOLT: Steel 1/2" throw. HANDING: Reversible for right or left hand doors. ANSI/BHMA: Exceeds Grade 2 Standards. U.L. Approved 3-Hour Fire Rating.
Schlage Elan F80 Standard Duty Door Lever Lockset STOREROOM LEVER CTL 2-3/4BS   Kwikset Dakota 687 Single Cylinder Door Handleset
Designed to provide reliable service in commercial environments such as multi-family and light commercial projects where basic needs or specific codes are required. Unlocked or locked by keyed lever outside. Emergency exit feature, no unlocking required for panic exit, inside knob always unlocked. All locksets have the same finish for both interior and exterior parts. DOOR PREP: 2-1/8" crossbore; 7/8" or 1" edge bore; 1" x 2-1/4" latch face. DOOR THICKNESS: 1-3/8" to 1-3/4". CYLINDER: 5-pin tumbler C keyway with nickel silver pins and keys (2). FACEPLATE: 1" x 2-1/4". STRIKES: 1-5/8" x 2-1/4" t-strike, full 1-1/8" lip. BOLT: 7/8" housing and 1" throw. ANSI/BHMA: A 156.2 Grade 2 requirements. Heavy-duty commercial storeroom lever; complies with ANSI A156.2, Series 4000, Grade 2 (400,000 cycles), UL listed for 3 hour fire door, ANSI A117.1 American Disabilities Act (ADA). Keying: 6 pin SCC keyway with 2 nickel keys per lock. Door range: 1-3/8" to 2". Backset: 2-3/4" standard. Strike: T strike (1-1/8" x 2-3/4") standard. Cylindrical, steel coated with zinc dichromate (corrosion resistance). Latchbolt operated by rotating inside lever or key in outside lever. Outside lever always fixed. Sectional handleset with single cylinder deadbolt. Latchbolt operated by thumbpiece outside and grip inside. Deadbolt operated by key outside and thumbturn inside. Security handlesets feature full 1" solid core throwbolt, all metal mechanisms, anti-pry shield and 5-pin system. DOOR PREP: Deadbolt - 2-1/8" or 1-1/2" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. Handle - 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: Deadbolt - adjustable 2-3/8" - 2-3/4" optional, Handle - dual 2-3/8" - 2-3/4" plainlatch standard. DOOR THICKNESS: 1-3/4" doors. CYLINDER: 5-pin. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: Deadbolt - 1" x 2-1/4" round corner. Handle -  2-1/4" full lip round corner. BOLT: Deadbolt - 1" throw. Handle - 1/2" throw plainlatch. HANDING: Reversible for right or left hand doors. SMT - SmartKey, re-key the lock in less than ten seconds.
Schlage Plymouth F58PLY605 Single Cylinder Door Handleset Schlage Plymouth F58 Single Cylinder Door Handleset Schlage Plymouth F58PLY505 Single Cylinder Door Handleset
For residential single and multi-family entrance doors. Deadbolt thrown or retracted by key from outside or by inside turn unit. Latch retracted by thumbpiece from inside or outside grip. Solid forged brass outside trim, wrought brass trim rings with concealed security inserts. Wrought brass inside trim. Wrought brass cylinder trim rings reinforced by tapered die cast security insert for resistance to wrenching or prying. All handlesets have the same finish for both interior and exterior parts except the Bright Brass finish which has a bright brass finish on all interior parts and Ultima Lifetime Anti-Tarnish finish on all exterior parts. DOOR PREP: 1-1/2" or 2-1/8" deadbolt and 2-1/8" latchbolt Crossbore; 7/8" or 1" Edge Bore; 1" x 2-1/4" Latch Faces; 4" CTC. DOOR THICKNESS: 1-5/8" to 1-3/4"; packed with extra mounting screws to accommodate 2" doors. CYLINDER: 5-pin with nickel silver pins and keys (2). FACEPLATES: 1" x 2-1/4". STRIKES: Deadbolt - 1-1/8" x 2-3/4", square corner, no lip, dust box and door frame reinforcer; Latchbolt - 1-5/8" x 2-1/4" full lip. BOLT: Maximum Security B300 single cylinder or B362 double cylinder deadbolt with 7/8" housing diameter, 1" throw. ANSI/BHMA: Grade 1 Security features. DUAL OPTION UNIVERSAL: Both handleset and deadbolt fit all doors, 2-3/8" or 2-3/4" backset; square corner, round corner, or drive-in preps. For residential single and multi-family entrance doors. Deadbolt thrown or retracted by key from outside or by inside turn unit. Latch retracted by thumbpiece from inside or outside grip. Solid forged brass outside trim, wrought brass trim rings with concealed security inserts. Wrought brass inside trim. Wrought brass cylinder trim rings reinforced by tapered die cast security insert for resistance to wrenching or prying. All handlesets have the same finish for both interior and exterior parts except the Bright Brass finish which has a bright brass finish on all interior parts and Ultima Lifetime Anti-Tarnish finish on all exterior parts. DOOR PREP: 1-1/2" or 2-1/8" deadbolt and 2-1/8" latchbolt Crossbore; 7/8" or 1" Edge Bore; 1" x 2-1/4" Latch Faces; 4" CTC. DOOR THICKNESS: 1-5/8" to 1-3/4"; packed with extra mounting screws to accommodate 2" doors. CYLINDER: 5-pin with nickel silver pins and keys (2). FACEPLATES: 1" x 2-1/4". STRIKES: Deadbolt - 1-1/8" x 2-3/4", square corner, no lip, dust box and door frame reinforcer; Latchbolt - 1-5/8" x 2-1/4" full lip. BOLT: Maximum Security B300 single cylinder or B362 double cylinder deadbolt with 7/8" housing diameter, 1" throw. ANSI/BHMA: Grade 1 Security features. DUAL OPTION UNIVERSAL: Both handleset and deadbolt fit all doors, 2-3/8" or 2-3/4" backset; square corner, round corner, or drive-in preps. For residential single and multi-family entrance doors. Deadbolt thrown or retracted by key from outside or by inside turn unit. Latch retracted by thumbpiece from inside or outside grip. Solid forged brass outside trim, wrought brass trim rings with concealed security inserts. Wrought brass inside trim. Wrought brass cylinder trim rings reinforced by tapered die cast security insert for resistance to wrenching or prying. All handlesets have the same finish for both interior and exterior parts except the Bright Brass finish which has a bright brass finish on all interior parts and Ultima Lifetime Anti-Tarnish finish on all exterior parts. DOOR PREP: 1-1/2" or 2-1/8" deadbolt and 2-1/8" latchbolt Crossbore; 7/8" or 1" Edge Bore; 1" x 2-1/4" Latch Faces; 4" CTC. DOOR THICKNESS: 1-5/8" to 1-3/4"; packed with extra mounting screws to accommodate 2" doors. CYLINDER: 5-pin with nickel silver pins and keys (2). FACEPLATES: 1" x 2-1/4". STRIKES: Deadbolt - 1-1/8" x 2-3/4", square corner, no lip, dust box and door frame reinforcer; Latchbolt - 1-5/8" x 2-1/4" full lip. BOLT: Maximum Security B300 single cylinder or B362 double cylinder deadbolt with 7/8" housing diameter, 1" throw. ANSI/BHMA: Grade 1 Security features. DUAL OPTION UNIVERSAL: Both handleset and deadbolt fit all doors, 2-3/8" or 2-3/4" backset; square corner, round corner, or drive-in preps.
Schlage Plymouth F58 Single Cylinder Door Handleset Schlage Camelot F58 Single Cylinder Door Handleset HANDLE SET EXTR S-CYL SA NIC
For residential single and multi-family entrance doors. Deadbolt thrown or retracted by key from outside or by inside turn unit. Latch retracted by thumbpiece from inside or outside grip. Solid forged brass outside trim, wrought brass trim rings with concealed security inserts. Wrought brass inside trim. Wrought brass cylinder trim rings reinforced by tapered die cast security insert for resistance to wrenching or prying. All handlesets have the same finish for both interior and exterior parts except the Bright Brass finish which has a bright brass finish on all interior parts and Ultima Lifetime Anti-Tarnish finish on all exterior parts. DOOR PREP: 1-1/2" or 2-1/8" deadbolt and 2-1/8" latchbolt Crossbore; 7/8" or 1" Edge Bore; 1" x 2-1/4" Latch Faces; 4" CTC. DOOR THICKNESS: 1-5/8" to 1-3/4"; packed with extra mounting screws to accommodate 2" doors. CYLINDER: 5-pin with nickel silver pins and keys (2). FACEPLATES: 1" x 2-1/4". STRIKES: Deadbolt - 1-1/8" x 2-3/4", square corner, no lip, dust box and door frame reinforcer; Latchbolt - 1-5/8" x 2-1/4" full lip. BOLT: Maximum Security B300 single cylinder or B362 double cylinder deadbolt with 7/8" housing diameter, 1" throw. ANSI/BHMA: Grade 1 Security features. DUAL OPTION UNIVERSAL: Both handleset and deadbolt fit all doors, 2-3/8" or 2-3/4" backset; square corner, round corner, or drive-in preps. For residential single and multi-family entrance doors. Deadbolt thrown or retracted by key from outside or by inside turn unit. Latch retracted by thumbpiece from inside or outside grip. Solid forged brass outside trim, wrought brass trim rings with concealed security inserts. Wrought brass inside trim. Wrought brass cylinder trim rings reinforced by tapered die cast security insert for resistance to wrenching or prying. Ultima Lifetime Anti-Tarnish finish on all exterior parts. DOOR PREP: 1-1/2" or 2-1/8" deadbolt and 2-1/8" latchbolt cross bore; 7/8" or 1" edge bore; 1" x 2-1/4" latch faces; 4" CTC. DOOR THICKNESS: 1-5/8" to 1-3/4"; packed with extra mounting screws to accommodate 2" doors. CYLINDER: 5-pin with nickel silver pins and keys (2). FACEPLATES: 1" x 2-1/4". STRIKES: Deadbolt - 1-1/8" x 2-3/4", square corner, no lip, dust box and door frame reinforcer; Latchbolt - 1-5/8" x 2-1/4" full lip. BOLT: Maximum Security B300 single cylinder deadbolt with 7/8" housing diameter, 1" throw. ANSI/BHMA: Grade 1 Security features. TRIPLE OPTION UNIVERSAL: Both handleset and deadbolt fit all doors, 2-3/8" or 2-3/4" backset; square corner, round corner, or drive-in preps. Exterior handle set with deadbolt. Adjustable bottom through-bolt for easy installation. Moves up and down 1-1/2" to fit pre-existing holes. 4" minimum center to center door prep required for this tow piece model.
Schlage Plymouth F58 Single Cylinder Door Handleset Schlage Plymouth F58 Single Cylinder Door Handleset Kwikset Chelsea 800 Signature Single Cylinder Door Handleset
For residential single and multi-family entrance doors. Deadbolt thrown or retracted by key from outside or by inside turn unit. Latch retracted by thumbpiece from inside or outside grip. Solid forged brass outside trim, wrought brass trim rings with concealed security inserts. Wrought brass inside trim. Wrought brass cylinder trim rings reinforced by tapered die cast security insert for resistance to wrenching or prying. All handlesets have the same finish for both interior and exterior parts except the Bright Brass finish which has a bright brass finish on all interior parts and Ultima Lifetime Anti-Tarnish finish on all exterior parts. DOOR PREP: 1-1/2" or 2-1/8" deadbolt and 2-1/8" latchbolt Crossbore; 7/8" or 1" Edge Bore; 1" x 2-1/4" Latch Faces; 4" CTC. DOOR THICKNESS: 1-5/8" to 1-3/4"; packed with extra mounting screws to accommodate 2" doors. CYLINDER: 5-pin with nickel silver pins and keys (2). FACEPLATES: 1" x 2-1/4". STRIKES: Deadbolt - 1-1/8" x 2-3/4", square corner, no lip, dust box and door frame reinforcer; Latchbolt - 1-5/8" x 2-1/4" full lip. BOLT: Maximum Security B300 single cylinder or B362 double cylinder deadbolt with 7/8" housing diameter, 1" throw. ANSI/BHMA: Grade 1 Security features. DUAL OPTION UNIVERSAL: Both handleset and deadbolt fit all doors, 2-3/8" or 2-3/4" backset; square corner, round corner, or drive-in preps. For residential single and multi-family entrance doors. Deadbolt thrown or retracted by key from outside or by inside turn unit. Latch retracted by thumbpiece from inside or outside grip. Solid forged brass outside trim, wrought brass trim rings with concealed security inserts. Wrought brass inside trim. Wrought brass cylinder trim rings reinforced by tapered die cast security insert for resistance to wrenching or prying. All handlesets have the same finish for both interior and exterior parts except the Bright Brass finish which has a bright brass finish on all interior parts and Ultima Lifetime Anti-Tarnish finish on all exterior parts. DOOR PREP: 1-1/2" or 2-1/8" deadbolt and 2-1/8" latchbolt Crossbore; 7/8" or 1" Edge Bore; 1" x 2-1/4" Latch Faces; 4" CTC. DOOR THICKNESS: 1-5/8" to 1-3/4"; packed with extra mounting screws to accommodate 2" doors. CYLINDER: 5-pin with nickel silver pins and keys (2). FACEPLATES: 1" x 2-1/4". STRIKES: Deadbolt - 1-1/8" x 2-3/4", square corner, no lip, dust box and door frame reinforcer; Latchbolt - 1-5/8" x 2-1/4" full lip. BOLT: Maximum Security B300 single cylinder or B362 double cylinder deadbolt with 7/8" housing diameter, 1" throw. ANSI/BHMA: Grade 1 Security features. DUAL OPTION UNIVERSAL: Both handleset and deadbolt fit all doors, 2-3/8" or 2-3/4" backset; square corner, round corner, or drive-in preps. Sectional handleset with single cylinder deadbolt. Latchbolt operated by thumbpiece outside and grip inside. Deadbolt operated by key outside and thumbturn inside. DOOR PREP: 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: Deadbolt - adjustable to 2-3/8" or 2-3/4", Handle - adjustable to 2-3/8" or 2-3/4". DOOR THICKNESS: 1-3/4" standard. 2-1/4" optional. Not designed for use on 1-3/8"doors. CYLINDER: 6-pin. 5-pin optional. FACEPLATE: 1" x 2-1/4". STRIKE: Deadbolt - 1-1/4" x 3-5/8" round corner standard. Includes ultra-strike door jam brace with (3) 3" screws. Handle - 2-1/4" full lip round corner standard. BOLT: Deadbolt - Brass bolt, full 1" throw, Titanium alloy roller pin. Handle - 1/2" throw. Nickel plated. HANDING: Reversible for right or left hand doors. ANSI/BHMA: Grade 1 Deadbolt.
Kwikset Arlington 800 Signature Single Cylinder Handleset Kwikset Chelsea 800CELIP Signature Single Cylinder Door Handleset Kwikset Chelsea 800 Signature Single Cylinder Door Handleset
Sectional handleset with single cylinder deadbolt. Latchbolt operated by thumbpiece outside and grip inside. Deadbolt operated by key outside and thumbturn inside. DOOR PREP: 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: Deadbolt - adjustable 2-3/8" or 2-3/4" adjustable, Handle - 2-3/8" plainlatch standard, 2" plainlatch optional. DOOR THICKNESS: 1-3/4" standard, 2-1/4" optional, not designed for use on 1-3/8" doors. CYLINDER:  6-pin. FACEPLATE:  1" x 2-1/4". STRIKE: Deadbolt -1-1/8" x 2-3/4 round corner standard. Includes ultra-strike door jam brace with (3) 3" screws. Handle - 2-1/4" full lip round corner standard. BOLT: Deadbolt - full 1" throw, Titanium alloy roller pin. Handle - 1/2" throw. Nickel plated. HANDING: Reversible for right or left hand doors. ANSI/BHMA: Grade 1 Deadbolt. Sectional handleset with single cylinder deadbolt. Latchbolt operated by thumbpiece outside and grip inside. Deadbolt operated by key outside and thumbturn inside. DOOR PREP: 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: Deadbolt - adjustable to 2-3/8" or 2-3/4", Handle - adjustable to 2-3/8" or 2-3/4". DOOR THICKNESS: 1-3/4" standard. 2-1/4" optional. Not designed for use on 1-3/8"doors. CYLINDER: 6-pin. 5-pin optional. FACEPLATE: 1" x 2-1/4". STRIKE: Deadbolt - 1-1/4" x 3-5/8" round corner standard. Includes ultra-strike door jam brace with (3) 3" screws. Handle - 2-1/4" full lip round corner standard. BOLT: Deadbolt - Brass bolt, full 1" throw, Titanium alloy roller pin. Handle - 1/2" throw. Nickel plated. HANDING: Reversible for right or left hand doors. ANSI/BHMA: Grade 1 Deadbolt. Sectional handleset with single cylinder deadbolt. Latchbolt operated by thumbpiece outside and grip inside. Deadbolt operated by key outside and thumbturn inside. DOOR PREP: 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: Deadbolt - adjustable to 2-3/8" or 2-3/4", Handle - adjustable to 2-3/8" or 2-3/4". DOOR THICKNESS: 1-3/4" standard. 2-1/4" optional. Not designed for use on 1-3/8"doors. CYLINDER: 6-pin. 5-pin optional. FACEPLATE: 1" x 2-1/4". STRIKE: Deadbolt - 1-1/4" x 3-5/8" round corner standard. Includes ultra-strike door jam brace with (3) 3" screws. Handle - 2-1/4" full lip round corner standard. BOLT: Deadbolt - Brass bolt, full 1" throw, Titanium alloy roller pin. Handle - 1/2" throw. Nickel plated. HANDING: Reversible for right or left hand doors. ANSI/BHMA: Grade 1 Deadbolt.
   
 
1 2