Home > FASTENERS > CHAIN, CABLE, ROPE > CHAIN / ACCESSORIES
Choose a sub category:
CHAIN - PROOF COIL CHAIN - HIGH TEST CHAIN - STRAIGHT LINK
CHAIN - TWIST LINK CHAIN - JACK CHAIN - TWIN LOOP
CHAIN - SASH CHAIN - DECORATIVE CHAIN - PLASTIC
CHAIN - SPECIALTY GRAB HOOKS SLIP HOOKS
CHAIN - COLD SHUTS CHAIN - LAP LINKS CHAIN - QUICK LINKS
CHAIN - SNAP LINKS CHAIN - SWIVELS CHAIN - CLEVIS LINKS
SPECIALTY FARM HITCH PINS ANCHOR SHACKLES
CLEVISES & PINS SNAPS WELDED RINGS
CHAIN HOISTS LOAD BINDERS POWER HOISTS
ROLLER CHAINS & PARTS
Sort By:
1 2 3 ... 26
Speeco 07090100/2702 Standard Tractor Lynch Pin Speeco 07091900/3548 Standard Tractor Lynch Pin Speeco 07090400/2704 Standard Tractor Lynch Pin
Forged carbon steel for maximum strength. Spring steel snap rings. Zinc plated to resist rust. Forged carbon steel for maximum strength. Spring steel snap rings. Zinc plated to resist rust. Forged carbon steel for maximum strength. Spring steel snap rings. Zinc plated to resist rust.
Campbell T7665012 Welded Ring RING ROUND 1-1/4IN            National Hardware 3152BC Lap Link
RING ROUND 1-1/4IN
Our Price: $0.71
LAP LINKS 1/8IN ZN PLT
Our Price: $0.71
Campbell Welded Ring, 1 in Length X 0.18 in Wire Size, Steel, Nickel Plated, 200 lb Load Capacity National Hardware Lap Link, Series: 3152BC, 1/8 in, Steel, Zinc Plated, 120 lb Load Capacity, Bolt Fastener, For Joining Two Lengths of Chain Together or Accessories to a Chain
National Hardware 3152BC Lap Link QUICK LINK ZN 3/16            Fehr Bros 3/16 Anchor Shackle
LAP LINKS 3/16IN ZN PLT
Our Price: $0.74
National Hardware Lap Link, Series: 3152BC, 3/16 in, Steel, Zinc Plated, 225 lb Load Capacity, Bolt Fastener, For Joining Two Lengths of Chain Together or Accessories to a Chain Factory number indicated thickness (inches). Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Meets Federal Specification RR-C-271F, type IV, Class 2.  WARNING: Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit].Use only Duty Rated Shackles, with embossed WLL,for overhead lifting.
Campbell T5950124 Repair Lap Link SHUT COLD ZINC PLATED 3/16IN  RING WELD 2-1/2IN
RING WELD 2-1/2IN
Our Price: $0.83
For connections of chain and attachments (Not for overhead lifting). WARNING: DO NOT exceed working load limit. Designed as a temporary chain link repair, use one size bigger than chain. Can be used to couple chain attachments. Do not reuse after closure. Manufactured from steel.
SPRING SNAP STEEL ZN 3/16     Fehr Bros 1/4IN Anchor Shackle SNAP BIT 1-3/4IN
SNAP BIT 1-3/4IN
Our Price: $0.91
WARNING: DO NOT EXCEED the working load limit. DO NOT USE for overhead lifting, to support human weight, for playground or athletic equipment, or as safety device. Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Meets Federal Specification RR-C-271F, type IV, Class 2.  WARNING: Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit].Use only Duty Rated Shackles, with embossed WLL,for overhead lifting. .
SNAP BIT 2-1/4IN              Speeco 07090800/2698 Tractor Lynch Pin Speeco 07091500/2709 Standard Tractor Lynch Pin
SNAP BIT 2-1/4IN
Our Price: $0.91
. Forged carbon steel for maximum strength. Spring steel snap rings. Zinc plated to resist rust. Forged carbon steel for maximum strength. Spring steel snap rings. Zinc plated to resist rust.
Campbell T4900324 Cold Shut Campbell T4900424 Cold Shut Campbell T7665032 Welded Ring
Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting. Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting. Campbell Welded Ring, NO 7 Chain, 1-1/4 in Length X 0.18 in Wire Size, Steel, Nickel Plated, 200 lb Load Capacity
National Hardware 3153BC Cold Shut National Hardware 3152BC Lap Link National Hardware 3155BC Ring
COLD SHUTS 1/4IN ZN PLT
Our Price: $1.00
LAP LINKS 1/4IN ZN PLT
Our Price: $1.00
RINGS #7X1IN ZN PLT
Our Price: $1.00
National Hardware Cold Shut, Series: 3153BC, 1/4 in, 0.24 in Rod Diameter, 0.26 in Hole Diameter, Steel, Zinc Plated, 1250 lb Load Capacity, 1.61 in Width, For Use to Couple Chain Attachments National Hardware Lap Link, Series: 3152BC, 1/4 in, Steel, Zinc Plated, 500 lb Load Capacity, Bolt Fastener, For Joining Two Lengths of Chain Together or Accessories to a Chain National Hardware Ring, Series: 3155BC, NO 7 X 1 in, Steel, Zinc Plated, 195 lb Load Capacity, For Rope, Chain and Strap
Baron 1407 Open Eye Spring Snap National Hardware 3155BC Ring BREACHING SNAP ZN 2-1/2
RINGS #4X1-1/4IN ZN PLT
Our Price: $1.06
Baron Spring Snap, Open Eye, 9/32 in Snap Opening, 3-3/8 in Overall Length, Steel, Nickel Plated National Hardware Ring, Series: 3155BC, NO 4 X 1-1/4 in, Steel, Zinc Plated, 270 lb Load Capacity, For Rope, Chain and Strap .
Campbell T7661152 Welded Ring National Hardware 3155BC Ring National Hardware 3153BC Cold Shut
RINGS #3X1-1/2IN ZN PLT
Our Price: $1.10
Campbell Welded Ring, NO 3 Chain, 2 in Length X 0.24 in Wire Size, Steel, Nickel Plated, 200 lb Load Capacity National Hardware Ring, Series: 3155BC, NO 3 X 1-1/2 in, Steel, Zinc Plated, 300 lb Load Capacity, For Rope, Chain and Strap National Hardware Cold Shut, Series: 3153BC, 5/16 in, 0.32 in Rod Diameter, 0.35 in Hole Diameter, Steel, Zinc Plated, 1900 lb Load Capacity, 1.94 in Width, For Use to Couple Chain Attachments
   
 
1 2 3 ... 26