Home > FASTENERS > CHAIN, CABLE, ROPE
Choose a sub category:
CHAIN / ACCESSORIES WIRE / CABLE ROPE / CORD / WEBBING
Sort By:
1 2
Fehr Bros 3/16 Anchor Shackle Fehr Bros 1/4IN Anchor Shackle Midland Big Orange 081163/MC645G Anchor Shackle
Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Meets Federal Specification RR-C-271F, type IV, Class 2.  WARNING: Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit].Use only Duty Rated Shackles, with embossed WLL,for overhead lifting. Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Meets Federal Specification RR-C-271F, type IV, Class 2.  WARNING: Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit].Use only Duty Rated Shackles, with embossed WLL,for overhead lifting. Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1
Fehr Bros 5/16 Anchor Shackle Baron 193LR-1/4" Screw Pin Anchor Shackle Midland Big Orange 081213/MC646G Anchor Shackle
Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Meets Federal Specification RR-C-271F, type IV, Class 2.  WARNING: Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit].Use only Duty Rated Shackles, with embossed WLL,for overhead lifting. Baron Screw Pin Anchor Shackle, 0.5 Ton Load Limit, 1/4 in, 5/16 in Pin Diameter, Steel Body, Galvanized Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1
SHACKLE ANCHOR SCRW PIN 5/16IN Midland Big Orange 081253/MC647G Anchor Shackle Fehr Bros 3/8 Anchor Shackle
WLL: 3/4 ton Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1 Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Meets Federal Specification RR-C-271F, type IV, Class 2.  WARNING: Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit].Use only Duty Rated Shackles, with embossed WLL,for overhead lifting.
Baron 2017Z Strap Eye Double End Swivel Midland Big Orange 081293/MC648G Anchor Shackle Baron 018-5/8 Round Eye Double End Swivel
Baron Double End Swivel, Strap Eye, 3/4 in Eye, Zinc Plated Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1 Baron Double End Swivel, Round Eye, 5/8 in Eye X 2-3/8 in Overall Length, Nickel Plated
Baron 018-3/4 Round Eye Double End Swivel SWIVEL DBL ROUND EYE NIC 1 IN Midland Big Orange 081343/MC649G Anchor Shackle
Baron Double End Swivel, Round Eye, 3/4 in Eye X 2-3/4 in Overall Length, Iron, Nickel Plated Baron Double Swivel, Round Eye, 100 lb, 1 in Snap Opening, 3-9/16 in Eye Width, 3-1/8 in Overall Length, Nickel-Plated Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1
National Hardware 3135BC Round Eye Snap Swivel SWIVEL NICKEL 1X1IN           Baron C-018-5/8 Round Eye Double End Swivel
SWIVELS 1X1IN NICKEL
Our Price: $2.89
National Hardware Swivel, Round Eye Snap, Series: 3135BC, 5/8 X 5/8 in, Zinc Die Cast, Nickel Plated, 105 lb Load Capacity, For Connecting Rope or Chain National Hardware Swivel Loop Eye, Series: N222, Suitable For Use With: Connecting Rope or Chain, 1 x 1 in, Zinc Die Cast, Nickel, 55 lb Load Capacity Baron Double End Swivel, Round Eye, 5/8 in Eye X 2-3/8 in Overall Length, Nickel Plated
Fehr Bros 1/2 Anchor Shackle Midland Big Orange 081373/MC650G Anchor Shackle Campbell T5423300 Twin Clevis Link
Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Meets Federal Specification RR-C-271F, type IV, Class 2.  WARNING: Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit].Use only Duty Rated Shackles, with embossed WLL,for overhead lifting. Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1 For use with Proof Coil or High Test Chain. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. No. T5423300 For chain  1/4" x 5/16"; Opening = 7/16    Pin = 3/8". No. T5423301 For chain 3/8"; Opening = 1/2"    Pin = 7/16"
National Hardware N223-677 Anchor Shackle SWIVEL FORGED GALV 3/16IN     Baron 82180/196 Double Clevis Link
National Hardware Anchor Shackle, Series: 3250BC, 1000 lb Load Limit, 5/16 in, Forged Steel Body, Galvanized, Federal Specifications RR-C-271D, Type IV, Class 2, BHMA A138.18, For Marine, Industrial and Construction Applications Designed to eliminate tangling of chain and rope. Manufactured from forged steel. Not designed for over-head lifting. Drop forged - heat treated carbon steel. Clevis pin is carbon steel - heat treated, cotter key is mild steel. Designed for joining together links of Grade 30 (proof coil) and Grade 43 (high test) chain without welding or peening.
SWIVEL FORGED GALV 1/4IN      LINK CLEVIS DBL 1/4&5/16IN    Fehr Bros 5/8 Anchor Shackle
Designed to eliminate tangling of chain and rope. Manufactured from forged steel. Not designed for over-head lifting. Designed for making quick connections with two chains in industrial and construction applications. Meets Grade 70 specifications. Removable clevis is for easier rigging. Manufactured from forged steel. Not designed for over-head lifting. Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Meets Federal Specification RR-C-271F, type IV, Class 2.  WARNING: Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit].Use only Duty Rated Shackles, with embossed WLL,for overhead lifting.
LINK CLVS DBL 5/16IN          National Hardware 3248BC Double Clevis Link SWIVEL FORGED GALV 5/16IN
Designed for making quick connections with two chains in industrial and construction applications. Meets Grade 70 specifications. Removable clevis is for easier rigging. Manufactured from forged steel. Not designed for over-head lifting. National Hardware Clevis Link, Double, Series: 3248BC, Suitable For Use With: Chain of an Equal or Lower Grade, 3/8 in, Forged Steel, Zinc Plated, 5400 lb Load Capacity, Grade 43 Specifications, For Making Quick Connections With Two Chains in Industrial and Construction Applications Designed to eliminate tangling of chain and rope. Manufactured from forged steel. Not designed for over-head lifting.
   
 
1 2