Home > FASTENERS > NUTS, BOLTS, SCREWS > ANCHORS
Choose a sub category:
ANCHORS - TOGGLE BOLTS ANCHORS - HOLLOW WALL ANCHORS - MASONRY
Sort By:
1 2 3 ... 9
SHUT COLD ZINC PLATED 3/16IN  National Hardware 3153BC Cold Shut Campbell T4900324 Cold Shut
COLD SHUTS 1/4IN ZN PLT
Our Price: $0.94
Designed as a temporary chain link repair, use one size bigger than chain. Can be used to couple chain attachments. Do not reuse after closure. Manufactured from steel. National Hardware Cold Shut, Series: 3153BC, 1/4 in, 0.24 in Rod Diameter, 0.26 in Hole Diameter, Steel, Zinc Plated, 1250 lb Load Capacity, 1.61 in Width, For Use to Couple Chain Attachments Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting.
Campbell T4900424 Cold Shut National Hardware 3153BC Cold Shut Campbell T4900524 Cold Shut
Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting. National Hardware Cold Shut, Series: 3153BC, 5/16 in, 0.32 in Rod Diameter, 0.35 in Hole Diameter, Steel, Zinc Plated, 1900 lb Load Capacity, 1.94 in Width, For Use to Couple Chain Attachments Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting.
Campbell T4900624 Cold Shut SHUT COLD ZINC PLATED 3/8IN   Twist-N-Lock 11364 Drywall Anchor
COLD SHUTS 3/8IN ZN PLT
Our Price: $1.34
Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting. Designed as a temporary chain link repair, use one size bigger than chain. Can be used to couple chain attachments. Do not reuse after closure. Manufactured from steel. Shorter length great for shallow walls. White color blends with white walls. Non-conductive/non-corroding nylon. Maximum fixture thickness: 3/4". #8 x 1-1/4" sheet  metal screw. Accommodates loads to 75 lbs. Drills directly into drywall.Installs quickly and easily with a #2 Phillips or cordless screwdriver; removable and reusable.  Applications: Smoke detectors, clocks, bathroom accessories, thermostats, plaques and awards, decorative wall hangings, picture frames, coat racks.
Twist-N-Lock 11353 Light Duty Drywall Anchor National Hardware 3153BC Cold Shut Stud Solver 29503 Hollow Wall Anchor
Shorter length great for shallow walls. White color blends with white walls. Non-conducive/non-corroding nylon. Maximum fixture thickness: 3/4". #6 x 1-1/4"sheet metal screw. Accommodates loads to 30 lbs. Drills directly into drywall.Installs quickly and easily with a #2 Phillips or cordless screwdriver; removable and reusable.  Applications: Smoke detectors, clocks, bathroom accessories, thermostats, plaques and awards, decorative wall hangings, picture frames, coat racks. National Hardware Cold Shut, Series: 3153BC, 7/16 in, 0.42 in Rod Diameter, 0.43 in Diameter, Steel, Zinc Plated, 3500 lb Load Capacity, 2.54 in Width, For Use to Couple Chain Attachments Starts easier than other self-drilling drywall anchors. No pre-drilling required; can accommodate #6-#8 diameter screws of any length. Up to 50lb load capacity. Drills directly into drywall or wood studs. Zinc die cast design for maximum durability. A superior alternative to traditional plastic plugs and mollies. Installs quickly and easily with a #2 Phillips or cordless screwdriver. #7 x 1-1/4" sheet metal screw; Maximum fixture thickness: 3/4". Removable. Applications: Closet organizers, Electrical fixtures, Curtain rods, HVAC Fixtures, Plumbing fixtures, Light shelving and supports, Signs.
Campbell T9001424 Eye Grab Hook Cobra 133Y Long Hollow Wall Anchor Cobra 137Y Short Hollow Wall Anchor
Drop forged carbon steel. Designed to grab a single link of chain on the side to form a loop for dragging, pulling or towing. WARNING: NOT TO BE USED FOR OVERHEAD LIFTING. DO NOT EXCEED WORK LOAD LIMIT. Pre-assembled unit. Three head styles of screws available. Sizes available: from 1/8'' Extra Short to 1/4'' Extra Long Pre-assembled unit. Three head styles of screws available. Sizes available: from 1/8'' Extra Short to 1/4'' Extra Long
Cobra 086Y Spring Toggle Bolt National Hardware 3153BC Cold Shut Campbell T4900824 Cold Shut
COLD SHUTS 1/2IN ZN PLT
Our Price: $2.24
Can be used in all types of hollow material. National Hardware Cold Shut, Series: 3153BC, 1/2 in, 0.47 in Rod Diameter, 0.52 in Hole Diameter, Steel, Zinc Plated, 4500 lb Load Capacity, 2.64 in Width, For Use to Couple Chain Attachments Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting.
Cobra 138Y Long Hollow Wall Anchor Cambell T9501424 Clevis Grab Hook Cobra 054S Medium Toggle Bolt
Pre-assembled unit. Three head styles of screws available. Sizes available: from 1/8'' Extra Short to 1/4'' Extra Long DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. Made of resistant nylon with wings that expand behind drywall. Corrosion resistant.
Cobra 059S Large Toggle Bolt Cobra 081Y Spring Toggle Bolt Cobra 082Y Spring Toggle Bolt
Made of resistant nylon with wings that expand behind drywall. Corrosion resistant. Can be used in all types of hollow material. Can be used in all types of hollow material.
Cobra 163Y Special Short Drive Hollow Wall Anchor Cobra 085Y Spring Toggle Bolt Campbell T9001524 Eye Grab Hook
Simply taps into drywall, no pre-drilling, vibration resistant. Can be used in all types of hollow material. Drop forged carbon steel. Designed to grab a single link of chain on the side to form a loop for dragging, pulling or towing. WARNING: NOT TO BE USED FOR OVERHEAD LIFTING. DO NOT EXCEED WORK LOAD LIMIT.
Cobra 096Y Spring Toggle Bolt Cobra 095Y Spring Toggle Bolt Cobra 242S Double Expansion Short Lag Shield
Can be used in all types of hollow material. Can be used in all types of hollow material. Can be used in all types of masonry. Corrosion resistant. It is internally threaded and installs flush to surface.
   
 
1 2 3 ... 9