Home > PLUMBING > KITCHEN & BATH > SHOWER & BATH REPAIR
Choose a sub category:
KITCHEN FAUCETS - SINGLE HANDL SHOWER HEADS KITCHEN FAUCETS - SH PULL OUT
SHOWER HEAD PARTS & ACCESS. KITCHEN FAUCETS - DUAL HANDLE TUB SPOUTS
LAVATORY FAUCETS - SINGLE HNDL TUB & SHOWER DRAINS/PARTS LAVATORY FAUCETS - DUAL HANDLE
SHOWER FAUCETS - SINGLE HANDLE TUB & SHOWER FAUCETS - SINGLE TUB & SHOWER FAUCETS - DUAL
TUB FILLER FAUCETS BAR SINK FAUCETS LAUNDRY SINK FAUCETS
SPECIALTY FAUCETS UTILITY FAUCETS SOAP DISPENSERS
Sort By:
1 2 3 ... 12
GASKET SHOWERHEAD 3 PACK      Oatey 43561 Snap-In Floor Drain GASKET TUB DRAIN CARTRIDGE
Rubber construction, 3/8" inner diameter, 3/4" outer diameter. Prevents leaks between shower arm and shower head. Includes three washers. Oatey Floor Drain, Snap-In, PVC, Oatey, 2 in Connection, Solvent Weld Connection, Suitable For Use With: SCH 40 DWV PVC Pipe, 2-1/4 in Strainer, 1 in Overall Height, 2-1/4 in Overall Width, 2-1/4 in Overall Length, White, UPC, CSA Certified, ISO 9001 Certified, For Drainage in Areas Where a Waterproofing Membrane is not Required Rubber, for tip-toe style bathtub stoppers. 2-1/16" x 1" x 1/4".
COVER DRAIN CLIP SHOWER3-3/8IN Oatey 42042 Tile Rings STRAINER TUB SNAP 2IN CHROME
Aluminum steel construction. Designed to fit 3-3/8" shower drains. Oatey Tile Ring, Series: 151, Square, Suitable For Use With: 151 Series Cast Iron Shower Drains, 4-1/4 X 4-1/4 in, Stainless Steel, Chrome Plated, 3-1/4 in Outside Diameter Steel construction, 2" diameter, grid-style.
Danco 80001 Tub Spout Ring Oatey 43569 Snap-In Floor Drain Danco 80002 Tub Spout Ring
Danco Tub Spout Ring, 3-5/8 in OD 2-1/4 in ID, 7/16 in Thick, Chrome Plated Oatey Floor Drain, Snap-In, PVC, Oatey, 4 in Connection, Solvent Weld Connection, Suitable For Use With: SCH 40 DWV PVC Pipe, 4-1/2 in Strainer, 1-3/4 in Overall Height, 4-1/2 in Overall Width, 4-1/2 in Overall Length, White, UPC, CSA Certified, ISO 9001 Certified, For Drainage in Areas Where a Waterproofing Membrane is not Required Danco Tub Spout Ring, 3-5/8 in OD 2-1/4 in ID, Brushed Nickel, For Drywall Taping and Patching
Plumb Pak PP826-64 Strainer Dome Cover Oatey 43565 Snap-In Floor Drain STRAINER SHOWER 3-3/8IN CHROME
Plumb Pak Strainer Dome Cover, 3 in Diameter, 1-1/2 in Screw Length, Chrome Oatey Floor Drain, Snap-In, PVC, Oatey, 3 in Connection, Solvent Weld Connection, Suitable For Use With: SCH 40 DWV PVC Pipe, 3-1/2 in Strainer, 1-3/4 in Overall Height, 3-1/2 in Overall Width, 3-1/2 in Overall Length, White, UPC, CSA Certified, ISO 9001 Certified, For Drainage in Areas Where a Waterproofing Membrane is not Required Steel construction, use with 3-1/8" drains. Screws not included.
PLATE OVERFLOW 1-HOLE CHROME  Plumb Pak PP22612 Face Plate Screw Danco 50673B Volume Control Washer
Round design with screw holes 2" center-to-center. Includes adapter to replace one or two hole plates. Screws included. Plumb Pak Face Plate Screw, Suitable For Use With: Bath Drain, Chrome Plated Danco Volume Control Washer, Suitable For Use With: Shower Heads With 1/2 in IPS Connection.
Plumb Pak Water Saver Economy Showerhead STRAINER TUB 2-15/16 BRSH NIC DRAIN SHOWER STALL 2 FIP
Plumb Pak Showerhead, Economy, Series: Water Saver, 1/2 in Connection, Plastic, White, For Indoor/Outdoor Application 2-15/16" diameter, brushed nickel finish. Replaces Gerber no. 91-292 Female threaded outlet, stainless steel grid, 3-1/2" flange diameter.
FLANGE SHOWER ARM CHROME      Plumb Pak Water Saver Economy Showerhead SHOWERHEAD M-HOME/RV CHROME
Metal construction, fits 1/2" IPS connection. Set screw style. Plumb Pak Showerhead, Economy, Series: Water Saver, 2.5 gpm, 1/2 in Connection, Plastic, Chrome Plated, For Indoor/Outdoor Application Constructed of durable plastic, 1/2" IPS connection.
FLANGE ARM SHOWER W/SCREW     DIVERTER TUB SPOUT REPAIR KIT Mintcraft B1140WH Shower Arms
Sized to slip over shower arm and has an adjustable set screw for a secure fit. Polished chrome finish. Includes lift knob, repairs diverters in most tub spouts. Complete kit. MintCraft Shower Arm, Plastic, White, 7 in Length, 1/2 in Standard, For Shower Installation
VALVE SHOWER CONTROL CHROME   Plumb Pak PP825-50 Shower Drain Grid SHOWER DRAIN 4-1/4 SNAP IN SS
Brass construction, fits standard 1/2" IPS connection, small trickle of water reminds user to shut water off at shower handle when done. For use between shower arm and head. Plumb Pak Shower Drain Grid, Chrome Plated, 3-5/16 in 4-1/2". Fits cast iron, plastic an clay tile pipes, prongs can be adjusted to fit drain. Prongs are 2-3/4" apart.
BASKET SHOWER HAIR CATCHER    Diamond Crystal 100012411 Extra Coarse Water Softener Solar Salt SHOWERHEAD 1 FUNCTION
SHOWERHEAD 1 FUNCTION
Our Price: $5.40
Durable plastic construction. Designed to fit the Danco hair catcher for shower drains (Model #'s: 10529. Stops hair and other particles from going down the drain Diamond Crystal Water Softener Solar Salt, Extra Coarse, Diamond Crystal, 40 lb Capacity, Bag Packing, Crystalline Solid, White, Halogen Odor/Scent, Composition: Sodium Chloride 7647-14-5, 2.16 Specific Gravity, 6.7 - 10 pH, NSF Approved Ruber spray holes, 2.0 gpm flow rate.
   
 
1 2 3 ... 12