Home > ELECTRICAL > ROUGH ELECTRICAL > ELECTRICAL WIRE
Choose a sub category:
BUILDING WIRE / NM WIRENUTS / CONNECTORS BUILDING WIRE / THHN
TERMINAL LUGS BUILDING WIRE / UF ELECTRICAL TAPE/DUCT SEAL
ENTRANCE CABLE WIRE TERMINAL ENDS ARMORED CABLE
TUBING & WRAPS ANTI-OXIDANTS GROUND WIRE
LAMP CORD SPLIT BOLT CONNECTORS SJ CORD
SPLICER / REDUCERS CABLE STAPLES SPECIALTY WIRE
CABLE TIES WIRE CLAMPS/CLIPS GLUES / CEMENTS
WIRE MANAGEMENT KITS ELECTRICAL BUSHINGS ELECTRICAL GROMMETS
MISC WIRING CONNECTORS
Sort By:
1 2 3 ... 38
Halex 71205B 2-Hole Conduit Strap Halex 61612B 2-Hole Snap-On Conduit Strap Halex 71210B 2-Hole Conduit Strap
Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed.
Halex 96163 2-Hole Snap-On Conduit Strap Halex 71212B 2-Hole Conduit Strap Carlon Snap Strap E978DC-CAR 1-Hole Single Conduit Strap
To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed. Safe, non-conductive. To be used in accordance with NEC, Article 347.8 conduit spacing requirements. For use with Schedule 40/80 non-metallic solvent weld fittings.
Halex 71215B 2-Hole Conduit Strap Carlon Snap Strap E978EC-CAR 1-Hole Single Conduit Strap Halex 96821 Rigid Reducing Conduit Washer
Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed. Safe, non-conductive. To be used in accordance with NEC, Article 347.8 conduit spacing requirements. For use with Schedule 40/80 non-metallic solvent weld fittings. Use to reduce the size of the conduit hole knockout opening in a steel outlet box or other metal enclosure. Must use one inside the enclosure opening and one on the outside. UL Listed, CSA Approved.
Halex 96111 1-Hole Conduit Strap Halex 61220B 2-Hole Conduit Strap Halex 96831 Rigid Reducing Conduit Washer
Indoor or outdoor applications. Use to secure Rigid or I.M.C. conduit to wood, masonry or similar surfaces. Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. Use to reduce the size of the conduit hole knockout opening in a steel outlet box or other metal enclosure. Must use one inside the enclosure opening and one on the outside. UL Listed, CSA Approved.
Halex 96832 Rigid Reducing Conduit Washer Halex 71220B 2-Hole Conduit Strap Halex 96121 2-Hole Conduit Strap
Use to reduce the size of the conduit hole knockout opening in a steel outlet box or other metal enclosure. Must use one inside the enclosure opening and one on the outside. UL Listed, CSA Approved. Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed. Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved.
Halex 96560 Beam Clamp Halex 96151 1-Hole Snap-On Conduit Strap Halex 96161 2-Hole Snap-On Conduit Strap
Use to secure conduit to a metal beam. Clamps on beam, girder or similar structure to provide a mounting base for attachment of a conduit hanger, either directly or by means of a threaded rod. Eliminates need to drill hole through beam. Indoor or outdoor applications. To support EMT conduit. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications.
Thomas & Betts E977DC-CTN 2-Hole Conduit Clamp Carlon Snap Strap E978FC-CAR 1-Hole Single Conduit Strap Halex 96112 1-Hole Conduit Strap
Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit. Safe, non-conductive. To be used in accordance with NEC, Article 347.8 conduit spacing requirements. For use with Schedule 40/80 non-metallic solvent weld fittings. Indoor or outdoor applications. Use to secure Rigid or I.M.C. conduit to wood, masonry or similar surfaces.
TAPE ELECT VNYL BLK 3/4INX60FT Halex 96780 Conduit Hanger Halex 96213 1-Hole Cable Strap
Black vinyl electrical tape for common electrical uses. 7 mil., UL Approved. Use to secure and suspend conduit from overhead supports. Comes with a nut and bolt. Steel, use to secure BX cable to wood, masonry or similar surface.
WASHER RDUCNG RGD 1-1/4X1/2IN WASHER RDUCNG RGD 1-1/4X3/4IN Halex 96122 2-Hole Conduit Strap
Use to reduce the size of the conduit hole knockout opening in a steel outlet box or other metal enclosure. Must use one inside the enclosure opening and one on the outside. UL Listed, CSA Approved. Use to reduce the size of the conduit hole knockout opening in a steel outlet box or other metal enclosure. Must use one inside the enclosure opening and one on the outside. UL Listed, CSA Approved. Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved.
Halex 96781 Conduit Hanger Thomas & Betts E977EC-CTN 2-Hole Conduit Clamp Intertape 602 Electrical Tape
Use to secure and suspend conduit from overhead supports. Comes with a nut and bolt. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit. General purpose electrical insulating tape, good dielectric strength. 7 mils thick. UL Listed and CSA Certified.
   
 
1 2 3 ... 38